Beam Antennas. We have all seen at least one of these antennas around. They are usually on top of a tower or at the very least on the roof of a tall building. Beam antennas need to be a good distance up in the air in order for them to work adequately. A good height for beam antennas ia generally 40 feet high but you will see them on top of towers over 100 feet tall. Many times on these larger towers you will see more than one of these beam antennas with each antenna dedicated to a certain frequency. One point of interest with beam antennas is that the smaller the antenna the higher the frequency it is used on.
The use of beam antennas in survival environments is not unheard of but the logistics of the tower, the rotator, and the antenna itself would likely be enough to prevent their use in most survivalist operations. In case you're wondering, the rotator mentioned earlier is to turn the antenna in the direction of the station you wish to communicate with. By their design a beam antenna's most powerful signal is heard from the front of it and the best way to block an offending signal is to turn a beam so the side or back of the beam is directed at the offender.
Beam antennas are not all created the same, some are made from aluminum tubing and are called yagi antennas. Another design for beams is that of a quad antenna. This antenna consists a 2 large arms crisscrossed and then a wire connects to the end of each of the arms. This antenna has an excellent reputation in the amateur radio community but it is quite a bit larger than a yagi antenna.
So before you contemplate the use of a beam antenna at your compound or even at your base station you need to total up the costs as well as the work involved in setting up a beam antenna. If you are working portable then you likely will not consider a beam antenna.