Radio Communication

Transmission of signals between various locations.

Antenna Systems

Devices used to propagate signals between transmitters and receivers.

Survivalists

Folks that are smart enough to be prepared.

Support Us!

Choose type of radio: Handhelds - Portable - Fixed
Shortwave: Handheld - Mobile - Tabletop


Icom has been a world leader in handheld radio technologu for many years. The latest offering of Icom handi talkies as they are IC91Arefered to is no exception. From the IC-V82 on up to the IC-90A tribander Icom definately has a handheld radio to fit your needs.

On this page we will give you some technical data on the various Icom handhelds to help you determine if they will fit into your survivalist startegy One thing for certai is that these small format Icom handhelds shoudl fit within any bug out bag.

IC-V82 / IC-U82

144MHz VHF FM Transceiver

Optional digital unit, UT-118

The optional UT-118 provides D-STAR format digital voice and slow data communiation. The UT-118 includes the following digital features.

Callsign calling

In the digital mode, your callsign and the receiving callsign (or CQ message) are included in each transmission. The callsign squelch allows you to choose an incoming call selected by the callsign. Also, received callsigns are automatically stored in the memory.

Position exchange with external GPS receiver

When connected to an external GPS receiver*, position information can be exchanged with other stations. When the receiving side is connected to a PC**, position monitoring is possible.
* NMEA 0183 output and RS-232C interface are required.
** Position mapping software required (Not supplied by Icom ).

And more digital features

20-character short data message

  • Digital code squelch
  • EMR communication
  • Digital pocket beep
  • Stand-by beep

7W powerful output power

A powerful 7W* output power provides superior transmit power. All this power is available with the supplied battery pack. Reduced power settings also allow you to adapt to the communication conditions and provide longer operating time.
* 5W for UHF.

200 memory channels and 10 memory banks

Up to 200 regular memory channels can be stored with a 6-character channel name, tone and duplex settings. The memory channels can be tagged with A-J bank name and allows you easy channel management. In addition, use Icom’s exclusive DMS (Dynamic Memory Scan) system to scan selected memory banks by simply adding and deleting blank links.

Built-in CTCSS/DTCS

Built-in CTCSS/DTCS tone codes provide quiet stand-by and allow you to access a closed repeater. The pocket beep alerts you when a matched tone frequency is received. The tone scan detects the tone frequency used in the receiving frequency.

Other features

  • NOAA weather channel receive*
    *USA version only
  • Automatic repeater function*
    *IC-82 USA version only
  • Reversible control knob and up/down buttons assignment
  • Durable construction and simple operation
  • 16 DTMF dial memory
  • PC cloning capability

IC-V82 Product Images

IC-V8 Sport

144MHz FM Transceiver

Tough Construction

The green polycarbonate front panel and aluminum die-cast chassis provide high reliability in the toughest conditions. The 54(W)×132(H)×35(D)mm* compact ergonomic body is easy for carrying anywhere.
* 21/8 (W) × 53/16 (H) × 13/8 (D) in.

16 Button Keypad for Easy-to-access Functions

The function guidance is labeled on the 16 buttons. It's easy to manage all of the functions equipped on the IC-V8 by pushing the Function key and shortcut keys. In addition, a channel number or an operating frequency can be entered from the keypad directly.

Powerful 5.5W of Output Power

The V8 Sport does not come with a battery pack.  It also comes with a case for AA Alkaline batteries.

Reversible Up/Down Switches and Rotary Selector

Channel selection, volume and squelch functions can be assigned to either the up/down switches or to the rotary selector.

5-character alphanumeric display

Letters and numeral character names provide easy recognition of each channel. S-meter, output power, power save, keylock, tone and duplex setting icons show various operating status at glance.

100 Memory Channels and One Call Channel

Up to 100 of your favorite frequency settings (including channel name, tone, output power and repeater offset) can be stored in the memory. Furthermore, one call channel provides one touch channel access for a frequently used frequency.

CTCSS and DTCS Operation Standard

50 CTCSS and 104×2 DTCS tone squelch operation codes (encode and decode) provide quiet standby and allow you repeater access. A pocket beep alerts you of a call and a tone scan can detect the sub-audible tone in use in the receiving signals.

Standard DTMF Encoder and Optional DTMF Decoder

5 DTMF memory channels with up to 24 DTMF codes allow remote operation. The optional UT-108 DTMF decoder unit provides code squelch operation as well as a pager function.

Other features

  • Set mode and initial set mode menu ensures easy operation
  • Very fast scanning speed of 40 channels per second (During program scanning)
  • Mic. simple remote control with optional HM-75A
  • LED backlighting for LCD
  • PC cloning capability
  • Reverse shift function
  • Auto squelch delay

IC-V8 Sport Product Images

IC-V85

VHF FM Transceiver

Compact body

While the IC-V85 provides a full 7 watts of output power, its 110mm* body height is compact enough to allow for easy carrying.
* 411/32 in (projections are not included)

7W of high output power

Let the power of 7 watts extend your communications range. With its large capacity Lithium-Ion battery pack, BP-227, the IC-V85/E provides a practical 7 hours* of operating time. Reduced power (4W/0.5W) settings are also available for even longer operating time.
* Typical operation with Tx: Rx: standby=1:1:8.

External DC power jack

An external DC power jack allows for operation when used with the external DC power supply (11.0V DC).
Your IC-V85/E receives and transmits as it charges.

Water resistant construction

The water resistant construction, equivalent to IPX4 rating, provides reliable operation in wet conditions for practical outdoor usage.

107 memory channels and 10 memory banks

Up to 107 memory channels can be stored. Use the 5-character display capabilities to assign your own individual channel names, then store those channels in any of the 10 memory banks. The DMS (Dynamic Memory Scan) system allows you to scan selected memory banks by simply adding and deleting bank links.

Built-in CTCSS/DTCS

Built-in CTCSS/DTCS tone codes provide quiet stand-by and allows you to use tone-access repeaters.
The pocket beep alerts you when a matching tone frequency is received. The tone scan detects the tone frequency used in the received signal.

DTMF memory and optional DTMF decoder

16 DTMF memory channels with up to 24 DTMF codes enable you to perform remote control operation.
The optional DTMF decoder unit, UT-108, provides code squelch operation and pager function.

Other features

  • Weather channel receive with weather alert*
  • Automatic repeater function*
  • Reversible control knob and up/down button assignment
  • PC cloning capability
    * USA version only

IC-V85 Product Images

IC-80AD

VHF/UHF Dual Band Transceiver

Switchable VHF/UHF dual bander

The IC-80AD provides VHF/UHF dual band capabilities (one band at a time) via a simple band switching system.

Wideband receiver

The IC-80AD has a wideband receiver as a standard feature and covers 0.495-999.99MHz. *Listen to aviation, marine, weather channels and other utility communications*.
*Reciver range depending on versions. See specificaions page.

CS-80/880 free download cloning software

The CS-80/880 free download cloning software is available from the Icom web site. Used with this software, various settings can be made from a PC and the memory channels and other settings can be shared between IC-80AD and its matching mobile unit, the ID-880H. Please download from http://www.icom.co.jp/world/support/download/firm/.
*Either OPC-1529R, OPC-478 or OPC-478UC optional cable is required.

1052 memory channels

The IC-80AD has a total of 1052 memory channels (including 1000 regular channels, 50 scan edges and 2 call channels) with 26 memory banks. All memory channels and the program scan can be named with 8-character channel comments. Also each memory bank can be named with a up0to 6 -character bank name comment.

Multiple scan function

The IC-80AD supports various scan types for maximum reception and ease of use

  • Full scan
  • Selected band scan
  • Programmed scan
  • Memory scan
  • Memory mode scan
  • All bank scan
  • Selected bank scan
  • Bank link scan (DMS)
  • Program scan link
  • Skip scan
  • Priority scan
  • Tone scan
  • Access repeater scan

Built-in CTCSS/DTCS encoder and decoder

Built-in CTCSS and DTCS tones are used for accessing a closed repeater or tone squelch operation. The pocket beep alerts you with a beep sound when the transceiver receives a preset tone. 1750Hz tone is also available.

Optional GPS speaker-microphone, HM-189GPS

When used with the new GPS speaker-microphone, HM-189GPS, the IC-80AD shows your position data on the display and offers a position reporting function in DV mode. The IC-80AD shows the direction to a memory position or to a received D-STAR station.

5 Watts (typical) output

The IC-80AD provides 5W (typical) output power both in VHF/UHF bands. The supplied BP-217 provides up to 6 hours* of operating time. When you don't need full power operation, you can reduce output power to 2.5/0.5/0.1W (typ.) for saving battery consumption
*Tx high: Rx: Stand-by duty ratio= 1 min.: 1min.: 8 min. Power save on.

External DC power jack

An external DC power jack allows for operation with an external DC power supply (10-16VA DC). When used with the DC power cable simultaneously operation during charging is possible.

Keypad navigation

The 4-direction cursor buttons on the keypad give you quick and intuitive access to many settings.

Additional features

  • Monitor function to listen to a weak signal
  • 14 Variable tuning steps
  • Auto repeater function automatically turns on/off duplex operation and tone encoder
  • Weather channel receive with weather alert
  • 16 DTMF memory channels (24 digits)
  • Key lock function
  • 4 steps RF power selection (5W, 2.5W, 0.5W, 0.1W)
  • Drip-resistant construction, equivalent to IPX4
  • Auto power save, power off and power on
  • 10dB (approx) built-in attenuator

IC-V80AD Product Images

IC-91A / IC-91AD

VHF/UHF Dual Band Transceiver

Wide band receiver with dualwatch capability

The IC-91AD/A has dualwatch receiver capability, allowing you to receive* two bands simultaneously (including same band). By pushing and holding the [Main/Dual] button, you can easily turn dualwatch on and off, while a press of the button allows you to toggle the active VFO channels.
*See specifications for receive range coverage.

Large dot-matrix LCD

Using a large full dot-matrix LCD (37.8×20mm; 11/2×25/32 in), the IC-91AD/A clearly shows two-line frequency settings, alphanumeric channel name, bandscope, etc. You can choose large or small font size in the setting mode. In addition, automatic LCD and keypad backlighting provides bright illumination for night time operation.

Simple bandscope

Spectrum activity is displayed on the screen and audio is heard while sweeping the range. It is useful for finding new or interfering signals.

5 Watts (typical) output

Icom’s original wideband PA circuit and supplied lithium-ion battery pack provides 5W (typ.) output. The supplied BP-217 provides up to 5/4.5 hours* of operating time and greatly reduces both the size and weight needed to obtain full output power.
* VHF/UHF single mode, Tx high: Rx: Stand-by duty ratio= 1: 1: 8

Keypad navigation

The 4 cursor direction buttons on the keypad gives you quick and intuitive access to many settings. The twin volume/channel knob provides convenient channel/volume setting.

External DC power jack

An external DC power jack allows for operation with an external DC power supply (10–16V DC). When used with the CP-19R or OPC-254L, simultaneous operation during charging is possible.

Built-in CTCSS/DTCS encoder and decoder

CTCSS and DTCS tones are used for accessing a repeater or for tone squelch operation. The pocket beep alerts you with a beep sound when the transceiver receives a preset tone.

Other features

  • Squelch release function to monitor a weak signal.
  • Water-resistant construction, equivalent to IPX4
  • Auto power save, power off and power on
  • 26 memory banks with selected bank and bank link scanning
  • 10 channel DTMF memory (16-digit)
  • 10dB (approx) built-in attenuator
  • Total of 1304 memory channels
  • Automatic repeater function*
  • Weather channel with weather alert*
    * USA version only

IC-91A Product Images

IC-92AD

VHF/UHF Dual Band Transceiver

Rugged Submersible Protection

The IC-92AD and HM-175GPS have superior waterproof protection and is equivalent to IPX7 (1m depth of underwater for 30 minutes). The aluminum diecast chassis and gasketsealed housing provide performance you can count on in harsh outdoor environments; when hiking, mountain biking, touring and for alpine activities.

Optional GPS Speaker-microphone

Used with the GPS speaker-microphone, HM-175GPS, the IC-92AD shows your position data on the display and offers automatic position reporting in DV mode. The IC-92AD shows the direction to a received D-STAR station or to a memory stored with a compass-like display pointer. In addition, the GPS-A mode assists in easy D-PRS system operation.

Wideband receiver with dualwatch capability

The IC-92AD has dualwatch receiver capability, allowing you to receive* on two bands simultaneously (including the same band). By pushing and holding the [Main/Dual] button, you can easily turn dualwatch on and off, while a single press toggles the active VFO channels (A band/B band).
* See specifications for receive range coverage.

5 Watts (typical) output

Icoms original wideband PA circuit and supplied lithium-ion battery pack provides 5W (typ.) output power on both VHF and UHF bands. The supplied BP-256 provides up to 6/5.5 hours* of operating time. When you dont need full power operation, you can reduce output power to 2.5/0.5/0.1W (typ.) to reduce battery consumption.

Simple bandscope

Simple bandscope Spectrum activity is displayed on the screen and audio is heard while sweeping. The bandscope is useful for finding new or interfering signals.

Built-in voice recorder function

The built-in voice recorder* records an incoming call for up to 30-seconds (approx.), (or 15 sec. × 2 tracks, 10 sec. × 3 tracks). For automated outgoing calls, you can pre-record up to 10 seconds of your callsign and/or CQ message in the IC-92ADs voice memory.
* Available in DV mode only

Large dot-matrix Display

Using a large full dot-matrix display (37.8×20 mm; 11/2×25/32 in), the IC-92AD clearly shows two-line frequency settings, alphanumeric channel name, bandscope, received message and position information, etc. You can change the display setting to show frequency or memory name in the center of the display. In addition, automatic LCD and keypad backlighting provides bright illumination for night time operation.

One touch reply button

The one-touch reply [CALL RX->CS] button memorizes the received callsign(s) with a single touch. This function allows you to respond to the calling station without hassle. In addition, up to 20 received callsigns are stored in a received call history.

Keypad navigation

The four cursor direction buttons on the keypad give you quick and intuitive access to many settings. The dual volume/channel knob provides convenient channel selection and volume control.

Optional PC remote control capability

When connected to a PC via RS-232C, most functions of the IC-92AD can be controlled from the PC with the optional RS-92 software. In DV mode operation, you can send and receive short messages of 20 characters (max.) on the PC.

Other features

  • Total of 1304 memory channels
  • External DC power jack (1016V DC acceptable)
  • 10 channel DTMF memory (16-digit)
  • Squelch disable function to monitor a weak signal
  • Built-in CTCSS/DTCS tone encoder and decoder (FM mode)
  • Auto power save, power off and power on
  • 26 memory banks with selected bank and bank link scanning
  • 10dB (approx) built-in attenuator
  • Automatic repeater function*
  • Weather channel with weather alert*
    * USA and Canada versions only

IC-92AD Product Images

IC-T7H Sport

Dual Band FM Transceiver

Powerful Output and Ample Receive Audio

Comfortably sized, with ample receive audio Extra power when you want it, or opt for more power with optional Ni-Cd battery packs – up to 6 watts! Take this go-anywhere sized dual bander on the road and grab more power from any convenience store, grocery store, etc. A full 500 mW (typical) of AF is output from the transceiver's speaker-audio that's easy to copy even in noisy environments.

Meets strict MIL standards, yet is compact

Tested to strict MIL standards, yet is compact The IC-T7Hsport is durably constructed for reliable operation you can count on in the most demanding environments. In fact, it has been tested to and passed the MIL-STD requirements and strict environmental standards for shock and vibration (MIL 810C, D, E). And its compact dimensions of 57(W) × 122(H) × 29(D) mm* mean you can comfortably carry it around in a small bag or even your shirt pocket!
*21/4 (W) × 413/16 (H) × 11/8 (D) in.

A simple operation

A simple band switching system, single push action and thumb-touch lock switches make operation straight-forward and convenient — even for beginners. Additionally, channel indication mode simplifies operation even further and is great for when operating in a group situation.

Built-in tone squelch system

A separate CTCSS tone encoder and CTCSS tone encoder/decoder are standard (38 standard EIA tones and 12 others for even quieter standby). Full programmable band scans and all/band select memory scans provide versatile signal searching. The tone scan function allows you to easily find the subaudible tone needed to access a repeater or to decode a tone squelch signal; the pocket beep function acts like a 'common pager' and alerts you when a matched CTCSS tone frequency is received.

Other Features

  • Large, easy-to-push PTT switch
  • Simple, microphone remote control with the optional HM-75A
  • Auto power saver with selectable duty
  • Multiple scans provide versatile signal searching
  • Auto power off function
  • Auto repeater function (USA version only)
  • LCD backlight with timer
  • 9 DTMF memories
  • Channel indication
  • Optional cloning software

IC-T7H Product Images

IC-T90A

VHF / UHF Multiband FM Transceiver

Surprisingly Compact, Full Featured Tri-Bander with Wideband Receiver

Wideband receiver - 495kHz to 999.990MHz

The commercial grade IC-T90A transceiver offers a wideband AM, FM, and WFM scanning receiver. Not only you can hear your favorite TV programs with the pre-programmed TV memories, but also you can listen to shortwave, AM and FM broadcast radio stations with good sound quality. Fire, aircraft and various amateur bands also can be tuned.

DMS (Dynamic Memory Scan) bank scanning

With 555 alphanumeric memory channels, including 50 band edges and 5 call channels, Icom's DMS technology gives you flexible scanning lists. With a maximum of 18 banks or 100 channels per bank,
you can pick and choose the desired channel for scanning from the 500 memories.

Lithium-Ion technology

Enjoy a full 5 watts from the supplied 1300mAh Lithium-Ion battery pack, BP-217. Along with the energy conserving settings, the BP-217 provides up to 5 to 6 hours* of operating time and greatly reduces both the size and weight needed to get full output power. Just recharge and go!
* Tx high: Rx: Stand-by duty ratio= 1: 1: 8

Rugged palm sized*2, weather-resistant construction

This compact radio is comfortable in the smallest of hands, and offers full radio control for large fingers. The aluminum die-cast case and chassis is designed for the most rugged environments with splash resistance equivalent to JIS 4 specifications.
*2 See back for actual dimensions.

DTCS and CTCSS tone squelch

A standard feature of the IC-T90A is both DTCS and CTCSS encode and decode capability. Choose from either 104 DTCS or 50 CTCSS codes for receive and transmit, individually. In addition, a pocket beep function gives you an audio alert when a matched tone signal is received__a great feature for quiet, group operations.

Simple operation

Simple, one-handed operation is the most valuable feature of the IC-T90A. The backlit ten-key pad allows you to enter frequency, memory number and set various other features. The tuning knob can be customized for either channel selection, or volume control.

Additional features

  • DTMF encoder with 10 DTMF memories
  • Auto squelch
  • Morse code synthesizer indicates the frequency in morse code
  • Backlit LCD and keypad
  • High speed scanning
  • 13 scanning modes
  • Antenna tip replaceable
  • PC Programmable
  • 5.5-11V DC operation
  • Split operation
  • Weather alert scan*
    * U.S.A. version only
IC-T90A Product Images

Tags: Icom radio Icom Handhelds Icom

This site is Gunny Approved

Tag Cloud

wire antennas stealth antennas Icom Kenwood
Yaesu portable antennas mobile antennas

Support Us!

Site Map | Links | Contact Us | Privacy

Icom 9500 Receiver

Watch this video to learn how hams practice for emergencies. [VIDEO]